Cisco Unified IP Phone 7975G CP-7975G= Datenbogen
Produktcode
CP-7975G=
Data Sheet
All contents are Copyright © 2007, 2008 Cisco Systems, Inc. All rights reserved. This document is Cisco Public Information.
Page 4 of 5
Signaling Protocols
Skinny Client Control Protocol (SCCP) and Session Initiation Protocol (SIP) with Cisco call
control
control
Table 3.
Temperature Ratings
Temperature Variable
Description
Operating Temperature
32 to 104°F (0 to 40°C)
Relative Humidity
10 to 95% (noncondensing)
Storage Temperature
14 to 140°F (–10 to 60°C)
Certifications—Compliance and Safety
Refer to the following link:
http://www.cisco.com/univercd/cc/td/doc/product/voice/c_ipphon/english/ipp7960/iphrcsi3.htm
.
Ordering Information
To place an order, visit the
Cisco Ordering Home Page
. To download software, visit the
Cisco
Software Center
.
Table 4.
Ordering Information—Phone/license
Part Number
Description
CP-7975G
Cisco Unified IP Phone 7975G
CP-7975G=
Cisco Unified IP Phone 7975G, spare
CP-7975G-CH1
Cisco Unified IP Phone 7975G, for Channels, with one station user license
CP-7975G-CCME
Cisco Unified IP Phone 7975G, for Channels, with one Cisco Unified Communications
Manager Express station user license
Manager Express station user license
Note:
All Cisco Unified IP phones require the purchase of a phone technology license,
regardless of call protocol being used.
Table 5.
Ordering Information—Accessories
Part Number
Description
CP-7914=
14-button expansion module. Up to two modules may be used.
CP-LCKNGWALLMOUNT=
Locking wall-mounting kit, flat (recommended version)
CP-WALLMOUNTKIT=
Nonlocking wall-mounting kit, slanted
CP-LCKNGWALLMNT2=
Locking wall-mounting kit, slanted
CP-PWR-CUBE-3=
Local power adapter for sites where PoE is not available; refer to Table 6 to select the
correct regional power cord. CP-PWR-CUBE-3= is compatible with and can replace CP-
PWR-CUBE-2=.
correct regional power cord. CP-PWR-CUBE-3= is compatible with and can replace CP-
PWR-CUBE-2=.
CP-PWR-INJ=
Single-port midspan power injector with integrated power supply, specifically designed and
tested for use with all Cisco Unified IP Phones. May be used as an alternative to the existing
Cisco phone local power adapter (CP-PWR-CUBE-3=), and can support a maximum
distance of 100 meters between an unpowered switch and a Cisco Unified IP Phone.
tested for use with all Cisco Unified IP Phones. May be used as an alternative to the existing
Cisco phone local power adapter (CP-PWR-CUBE-3=), and can support a maximum
distance of 100 meters between an unpowered switch and a Cisco Unified IP Phone.
Table 6.
Ordering Information—AC Country Power Cords
Part Number
Description
CP-PWR-CORD-AP=
Asia Pacific
CP-PWR-CORD-AR=
Argentina
CP-PWR-CORD-AU=
Australia
CP-PWR-CORD-CE=
European Community
CP-PWR-CORD-CN=
China
CP-PWR-CORD-JP=
Japan