Panasonic DK1A-5V-F PCB Mount Relay DK1A-5V-F Datenbogen

DK

9

ds_61A03_en_dk: 201113D

1. Match the direction of relay and 
socket.

2. Both ends of the relay are to be 
secured firmly so that the socket hooks 
on the top surface of the relay.

3. Remove the relay, applying force in the 
direction shown below.

4. In case there is not enough space to 
grasp the relay with fingers, use 
screwdrivers in the way shown in the 
illustration.

Notes: 1. Exercise care when removing relays. If 

greater than necessary force is applied at 
the socket hooks, deformation may alter the 
dimensions so that the hook will no longer 
catch, and other damage may also occur.

2. It is hazardous to use IC chip sockets.

GOOD

NO GOOD