Zettler Electronics AZ762-1A-18DE Miniature PCB Mount Relay 18Vdc 1 NO, SPST-NO AZ762-1A-18DE Datenbogen
Produktcode
AZ762-1A-18DE
16 A SPDT MINIATURE
POWER RELAY
POWER RELAY
FEATURES
• Dielectric strength 5000 Vrms
• High Inrush version (80 A) available
• AC and DC coils
• Isolation spacing greater than 10 mm
• Reinforced insulation, EN 60730-1 (VDE 0631, part 1),
• High Inrush version (80 A) available
• AC and DC coils
• Isolation spacing greater than 10 mm
• Reinforced insulation, EN 60730-1 (VDE 0631, part 1),
EN 60335-1 (VDE 0700, part 1)
• UL, CUR file E44211
• VDE certificate 40006031
• VDE certificate 40006031
AZ762
GENERAL DATA
Life Expectancy
Minimum operations
Mechanical
1 x 10
7
Electrical
1 x 10
5
at 16 A 250 VAC Res.
Operate Time (typical)
7 ms at nominal coil voltage DC coils
10 ms at nominal coil voltage AC coils
Release Time (typical)
3 ms at nominal coil voltage
(with no coil suppression)
(with no coil suppression)
Dielectric Strength
5000 Vrms coil to contact
(at sea level for 1 min.) 1000 Vrms between open contacts
Insulation
1000 megohms min. at 20°C
Resistance
500 VDC 50% RH
Insulation
C250
(according to
Overvoltage category: III
DIN VDE 0110,
Pollution degree: 3
IEC 60664-1)
Nominal voltage: 250 VAC
Dropout DC coils
Greater than 10% of nominal coil voltage
AC coils
Greater than 15% of nominal coil voltage
Ambient Temperature
At nominal coil voltage
Operating
-40°C (-40°F) to 85°C (185°F) DC coils
-40°C (-40°F) to 70°C (158°F) AC coils
-40°C (-40°F) to 70°C (158°F) AC coils
Vibration
0.062" (1.5 mm) DA at 10–55 Hz
Shock
10 g
Enclosure
P.B.T. polyester
Terminals
Tinned copper alloy, P. C.
Max. Solder Temp.
270°C (518°F)
Max. Solder Time
5 seconds
Max. Solvent Temp.
80°C (176°F)
Max. Immersion Time
30 seconds
Weight
14 grams
Packing unit in pcs
50 per plastic tray / 500 per carton box
COIL
Power
At Pickup Voltage
200 mW standard DC coil
140 mW sensitive DC coil
140 mW sensitive DC coil
(typical)
.422 VA (AC coil)
Max. Continuous
1.7 W at 20°C (68°F) ambient
Dissipation
1.7 VA at 20°C (68°F) ambient
Temperature Rise
26°C (47°F) standard coil
(at nominal coil voltage)
17°C (31°F) sensitive coil
Temperature
Max. 130°C (266°F)
NOTES
1. All values at 20°C (68°F).
2. Relay may pull in with less than “Must Operate” value.
3. Specifications subject to change without notice.
CONTACTS
Arrangement
SPDT (1 Form C)
SPST (1 Form A)
SPST (1 Form A)
Ratings
Resistive load:
Max. switched power: 480 W or 5540 VA
Max. switched current: 16 A
Max. switched voltage: 125 VDC* or 440 VAC
Max. switched current: 16 A
Max. switched voltage: 125 VDC* or 440 VAC
* Note:
If switching voltage is greater than 30 VDC,
special precautions must be taken.
Please contact the factory.
special precautions must be taken.
Please contact the factory.
Material
Silver cadmium oxide [1], silver tin oxide [2],
silver nickel [3]. Gold plating available
silver nickel [3]. Gold plating available
Resistance
< 50 miliohms initially
ZETTLER electronics GmbH
Junkersstr. 3, D-82178 Puchheim, Germany
phone: +49 89 800 97-0
fax:
fax:
+49 89 800 97-200
office@ZETTLERelectronics.com
www.ZETTLERelectronics.com
This product specification to be used only together with the application notes
which can be downloaded from http://www.ZETTLERelectronics.com/pdfs/relais/ApplicationNotes.pdf
which can be downloaded from http://www.ZETTLERelectronics.com/pdfs/relais/ApplicationNotes.pdf
2014-01-29