Crydom DR10D06 SeriesOne DIN Rail Mount Solid State Relay DR10D06 Merkblatt
Produktcode
DR10D06
AC/DC Output Single Channel &
AC Output Dual Channel
Crydoms SeriesOne DR Solid State Relays were developed to offer the advantages of Crydom's thermal
management technology in a compact 11 & 18 mm wide IP20 housing with unique integrated heat sink.
The SeriesOne DR provides a quick and easy installation onto any standard 35 mm DIN rail profile
paired with high output power ratings.
management technology in a compact 11 & 18 mm wide IP20 housing with unique integrated heat sink.
The SeriesOne DR provides a quick and easy installation onto any standard 35 mm DIN rail profile
paired with high output power ratings.
FEATURES
Single channel 6 & 12 Amps output power rating
Two independent 6 Amp channels in dual channel versions
Single channel 60 & 100 VDC, 24 to 600 VAC operating voltage ratings
Dual channel 24 to 600 VAC operating voltage ratings
4-32 VDC, 24, 120 & 230 VAC control input options available for single channel versions
4-32 VDC control input for dual channel versions
AC Output versions with Zero Voltage Turn-On for resistive loads and Random Turn-On for inductive loads
Two independent 6 Amp channels in dual channel versions
Single channel 60 & 100 VDC, 24 to 600 VAC operating voltage ratings
Dual channel 24 to 600 VAC operating voltage ratings
4-32 VDC, 24, 120 & 230 VAC control input options available for single channel versions
4-32 VDC control input for dual channel versions
AC Output versions with Zero Voltage Turn-On for resistive loads and Random Turn-On for inductive loads
INSTALLATION INSTRUCTIONS
Install the relay on the DIN rail (as shown in drawing)
Wire the relay to the input side. 22 AWG minimum,
16 AWG maximum
Wire the relay to the output side. 22 AWG minimum,
14 AWG x 2 or 12 AWG x 1 (standed/solid) maximum
Wire the relay to the input side. 22 AWG minimum,
16 AWG maximum
Wire the relay to the output side. 22 AWG minimum,
14 AWG x 2 or 12 AWG x 1 (standed/solid) maximum
Maximum recommended terminal screw torque
input 4.4 in/lbs (0.5 Nm) & output 7.0 in/lbs (0.8 Nm)
input 4.4 in/lbs (0.5 Nm) & output 7.0 in/lbs (0.8 Nm)
If multiple units are installed be sure to follow
derating curves (reverse side of this sheet)
derating curves (reverse side of this sheet)
Please read all installation instructions before using SeriesOne DR SSRs.
PART NUMBER NOMENCLATURE
12
24
D
DR
Series
Single Channel
Dual Channel
Max Output Voltage
06:
10:
06:
10:
Control Voltage
A:
B:
B:
D:
E:
Output Current
48:
06:
24:
12:
Option
Blank:
Blank:
1 to 60 VDC
1 to 100 VDC
1 to 100 VDC
208 to 265 VAC
90 to 140 VAC
90 to 140 VAC
4 to 32 VDC
18 to 36 VAC
48 to 600 VAC
6 Amps
24 to 280 VAC
12 Amps
Zero Voltage Turn-On
Random Turn-On
(AC Output Only)
(AC Output Only)
R:
AC
Output
Only
Required for valid part number
For options only and not required
for valid part number
for valid part number
R
(A)
(A)
Not all combinations of ratings are available.
06
24
D
DRD
Series
Max Output Voltage
24:
48:
24:
48:
Control Voltage
D:
D:
Output Current
06:
06:
24 to 280 VAC
48 to 600 VAC
48 to 600 VAC
4 to 32 VDC
6 Amps
Option
Blank: Zero Voltage Turn-On
R: Random Turn-On
Blank: Zero Voltage Turn-On
R: Random Turn-On
(AC Output Only)
R
Rev: 072310
To install on DIN rail
To remove from
DIN rail