CHIPDRIVE CLOUD 4700F 905511 Datenbogen

 

 
The following table defines the values for the Mode parameter: 

 
ISO mode uses APDU mode of data transfer and is used for normal operation. This is the 
default mode of the reader on Power up. 

EMV mode also uses APDU mode of data transfer and is used for EMV test purposes. This 
mode has more stringent checks for Smartcard detection and Communication as per EMV4.2 
spec. 

Synchronous mode is used for communicating only with Memory cards.  

NFC test mode is used to ignore deactivate-activate sequence during SCardConnect. 
(PC_TO_RDR_ICCPOWERON - 0x62, and PC_TO_RDR_ICCPOWEROFF – 0x63) 

NULL 

 

This Escape command retrieves the current mode of the reader.  

The input buffer contains the escape code value.  

 

 

 

The currently active reader mode will be returned as a byte value 

 

ISO 

0x00 

ISO 7816 mode 

EMV 

0x01 

EMV mode 

Synchronous  0x02 

Memory card mode (synchronous) 

NFC Test 

0x04 

NFC Test Mode  

ISO 7816 

0x00 

ISO 7816 mode – Applicable for both contact slot and contactless 
slot 

EMV 

0x01 

EMV – Applicable only for contact slot and ignored by contactless 
interface 

Synchronous  0x02 

Memory card mode (Synchronous) – Applicable only for contact 
slot and ignored by contactless interface  

NFC Test 

0x04 

NFC Test Mode – Applicable only for contactless interface 

Escape code(0x02)