C&E FS20 Wireless switch 1-channel Adapter Switching capacity (max.) 3680 VA 61430 Datenbogen

To register the wireless switch socket ‘FS20 ST’ with a FS20 transmitter (for
example, a remote control from the FS20 wireless control system or other
devices, such as the load monitor ‘FS20 FMS’), proceed as follows:
• Press and hold the control button on the ‘FS20 ST’ for at least 15

seconds. The control indicator/LED on the wireless switch socket starts
to blink and the device is now in programming mode.



Alternatively, the wireless switch socket can also be plugged
into the socket with the control button already pressed. This
way the device switches immediately to programming mode
(control indicator/LED blinks).

• Briefly press a button of the desired key combination on your remote

control or corresponding control button of a FS20 device (for example,
load monitor ‘FS20 FMS’).
When the wireless switch socket receives the code the control indicator/
LED stops blinking.
The wireless switch socket is now programmed to this remote control or
the corresponding FS20 device.

• If required, the programming can be replaced at any time by another

button on the remote control, or by another remote control channel. To
do this, proceed again as described above.



Additional functions (for example, timer programming) are
described later in this user manual.