C&E FS20 Wireless switch 1-channel Adapter Switching capacity (max.) 3680 VA 61430 Datenbogen
Produktcode
61430
15
11. Handling
The product should only be used in dry indoor areas.
The following unfavourable conditions at the installation site, during opera-
tion or transport are to be avoided:
- Moisture or excessive air humidity
- Extreme cold or heat
- Direct sunlight
- Dust or flammable gases, vapours or solvents
- Strong vibrations
- Strong magnetic fields such as those found near machines or loudspeak-
The following unfavourable conditions at the installation site, during opera-
tion or transport are to be avoided:
- Moisture or excessive air humidity
- Extreme cold or heat
- Direct sunlight
- Dust or flammable gases, vapours or solvents
- Strong vibrations
- Strong magnetic fields such as those found near machines or loudspeak-
ers
Never use the product immediately after it has been brought from a cold
room into a warm one. The condensation water generated could destroy the
product.
Wait until the product has reached room temperature. This can take
several hours.
Do not handle the product with damp or wet hands! This is true for all
electrical devices!
The device must not be opened or taken apart.
There are no serviceable parts inside the product. The licence (CE) and the
guarantee/warrantee becomes invalid if you open/take apart the device.
Make sure that the insulation of the entire product is neither damaged nor
destroyed. Always check the product for damage before using it!
room into a warm one. The condensation water generated could destroy the
product.
Wait until the product has reached room temperature. This can take
several hours.
Do not handle the product with damp or wet hands! This is true for all
electrical devices!
The device must not be opened or taken apart.
There are no serviceable parts inside the product. The licence (CE) and the
guarantee/warrantee becomes invalid if you open/take apart the device.
Make sure that the insulation of the entire product is neither damaged nor
destroyed. Always check the product for damage before using it!
If you detect any damage, do NOT connect the product to
the supply voltage! Life-threatening danger!