Mediola FS20 Wireless master slave transmitter 1-channel Max. range (open field) 100 m 1057-97 Datenbogen

Produktcode
1057-97
Seite von 37
16
b) Setting the commands
Please note:
If you accidentally press the button one time too many in a
given menu, you can return to the beginning of the menu (LED
blinks in intervals, 1x each) by repeatedly pressing the button
briefly.
1. Setting the ‘positive flank mode’
‘Positive flank mode’ means that the switching command for the slave
device is transmitted when the master device is turned on (when the power
consumption of the consumer load rises).
The factory setting here is ‘power-on command’. This can be changed as
follows:
• From the normal operating mode press the control button on the ‘FS20
FMS’ for 5 seconds (LED goes out after 2 seconds and lights up again
after 5 seconds).
• Release the button, the LED blinks in intervals, 1x each
• Press the button briefly 3x, the LED blinks in intervals, 4x each
• Press and hold the button for 2 seconds, LED goes out, release the
button, LED blinks in intervals, 1x each
• Now select one of the commands in the command mode (see ‘3. Setting
the command mode’ on the next page); press the button the corre-
sponding number of times (always pressing the button briefly).
2. Setting the ‘negative flank mode’
‘Negative flank mode’ means that the switching command
for the slave device is transmitted when the master device is turned off (see
example 9. a).