Mediola FS20 Wireless master slave transmitter 1-channel Max. range (open field) 100 m 1057-97 Datenbogen

Produktcode
1057-97
Seite von 37
8
5. Description of functions
The ‘FS20 FMS’ load monitor registers when a connected electric consumer
load (master) is turned on or off and, with this information, remotely controls
any number of switching receivers in the FS20 system, for example, an
‘FS20 ST’ wireless switch socket.
The switching direction can be selected. With the factory settings the ‘FS20
FMS’ transmits a power-on command when the connected consumer is
switched on and a power-off command when it is switched off.
The opposite function can be programmed (power-on command
when the consumer is turned off and power-off command
when it is turned on).
The triggering threshold can be adjusted in 7 steps, allowing consumer
loads to be monitored that consume power while in standby mode.
Due to the integration in the FS20 address and coding system, the data
transfer within the FS20 wireless control system is very secure and several
neighbouring systems can be operated simultaneously (for instance, if your
neighbour uses the same system).
The ‘FS20 FMS’ can be operated using any conventional earthed socket
(230V~/50Hz). A consumer load with or without contact protection can be
plugged into the socket of the ‘FS20 FMS’. The consumer load can have a
maximum power consumption of up to (depending on the earthed socket!)
3680VA (230V~/16A).
The ‘FS20 FMS’ is operated and programmed using the button on its front
side, the status and program messages are displayed with an LED.