Davis Instruments Niederschlagsmesser DAV-7852M Wireless Sensor DAV-7852M Datenbogen

 

Davis Instruments, 3465 Diablo Avenue, Hayward, CA 94545-2778 U.S.A. • 510-732-9229  •  www.davisnet.com

® 

This instruction manual takes you step-by- 
step through the procedures required to  
install the Rain Collector II. The Rain  
Collector II is designed for use with any of  
Davis’ Vantage Pro2 weather stations, including                                                               
the Anemometer/Sensor Transmitter Kit. 
 
 
 

If you are installing the Rain Collector II in a Weather Wizard or Weather Monitor, please refer 
to the Rain Collector II for GroWeather, EnviroMonitor, Weather Monitor and Wizard manual 
which can be found in the support section of the Davis web site. (Go to www.davisnet.com, 
click Support, Weather Support, Instruction Manuals. Choose your station from the pull down 
menu and scroll down to find the manual.)

The Rain Collector II includes the following components. Please make sure you have 
all listed components before continuing.
•Rain Collector with Cable — The rain collector comes with the cone attached to the 

base and has a 40’ (12m) cable. 

•Four #8 x 3/4" Screws
•Debris Screen — This screen is placed into the rain collector cone to help prevent 

debris from clogging the funnel hole.

•Metric Rain Adapter — This adapter adds weight to the tipping mechanism, adjusting 

it to tip for every 0.2 mm of rainfall instead of every 0.01”. 

You may need some of the following tools and materials to install the rain collector.
•Drill with 3/32” (2

 

mm) drill bit

•Medium Phillips screwdriver
•3/16” (or 5 mm) wrench
•Cable clips or weather-resistant cable ties with screw holes or other means for mount-

ing

•Bubble level