C&E Profi Funk-Farb-Wetterstation Wireless Weather Station W237-8+W266G8 9129c19 Datenbogen
Produktcode
W237-8+W266G8 9129c19
50
m) Alarm Function
Displaying alarm time
• Briefly push the button „ALARM“ (5). The upper right of the display shows „ALARM“ and the currently set alarm
• Briefly push the button „ALARM“ (5). The upper right of the display shows „ALARM“ and the currently set alarm
time.
• After a few seconds without pushing a button, the display switches back to the time display automatically.
Switching the Alarm Function On/Off
• Briefly push the button „ALARM“ (5) to display the alarm time, see above.
• Pushing the button „ALARM“ (5) again briefly activates or deactivates the alarm function.
• If the alarm function is switched on a bell symbol „ “ appears at the top of the display.
Setting Alarm Time
• Briefly push the button „ALARM“ (5) to display the alarm time, see above.
• Keep the „ALARM“ (5) button pushed until the hours of the alarm time start to flash.
• Use the button „CHANNEL/+/SEARCH“ (3) or „MEM/-“ (4) to set the hours of the alarm time. Keep the respective
Switching the Alarm Function On/Off
• Briefly push the button „ALARM“ (5) to display the alarm time, see above.
• Pushing the button „ALARM“ (5) again briefly activates or deactivates the alarm function.
• If the alarm function is switched on a bell symbol „ “ appears at the top of the display.
Setting Alarm Time
• Briefly push the button „ALARM“ (5) to display the alarm time, see above.
• Keep the „ALARM“ (5) button pushed until the hours of the alarm time start to flash.
• Use the button „CHANNEL/+/SEARCH“ (3) or „MEM/-“ (4) to set the hours of the alarm time. Keep the respective
button pressed for quick adjustment.
• Briefly push the „ALARM“ button (5). The alarm time minutes flash.
• Use the button „CHANNEL/+/SEARCH“ (3) or „MEM/-“ (4) to set the minutes of the alarm time. Keep the respective
• Use the button „CHANNEL/+/SEARCH“ (3) or „MEM/-“ (4) to set the minutes of the alarm time. Keep the respective
button pressed for quick adjustment.
• Briefly push the button „ALARM“ (5) to leave setting mode.
Activate Snooze Function or Activate Alarm
When the alarm signal is activated at the set alarm time, the symbol „ “ flashes.
• Pushing the button „SELECT/Zz“ (1) interrupts the alarm signal for the duration of 10 minutes. During this time, the
Activate Snooze Function or Activate Alarm
When the alarm signal is activated at the set alarm time, the symbol „ “ flashes.
• Pushing the button „SELECT/Zz“ (1) interrupts the alarm signal for the duration of 10 minutes. During this time, the
symbol „ “ continues to flash. Then the alarm signal is started again. This procedure can be repeated several
times.
• Terminate alarm signal by briefly pushing „ALARM“ (5). This permits prematurely interrupting/terminating the snooze
function as well.
If you do not manually terminate the alarm signal, it is automatically terminated after approx. 2 minutes.
n) Display Illumination
• If the weather station is supplied with power through the plug-in mains adapter, permanent lighting is activated
automatically.
Pushing the button „SELECT/Zz“ (1) for about 3 seconds permits deactivation of the display illumination (e.g. at
night) and activating it again.
• If the weather station is only supplied with power through batteries (plug-in mains adapter not used), the display is
only activated when pushing a button or during the alarm signal. The display illumination goes out automatically after
a few seconds to save power.
To activate the illumination briefly, push the button „SELECT/Zz“ (1) briefly.