Technoline Temperaturstation Alu Wireless Weather Station WS 8301 Datenbogen

Produktcode
WS 8301
Seite von 21
User may also use the double sided tape to install the transmitter onto wall. On 
smooth surfaces this can be used instead of drilling holes. The mounting 
surface can, however, affect the transmission range. If for example the unit is 
attached to a piece of metal, it may then either reduce or increase the 
transmitting range. For this reason, we recommend not placing the unit on any 
metal surfaces or in any position where a large metal or highly polished 
surface is in the immediate proximity (garage doors, double glazing, etc.). 
Before securing in place, please ensure that the Temperature Station can 
receive the 868MHz signal from the Thermo-hygro transmitter at the positions 
that you wish to situate them.
 
 
CARE AND MAINTENANCE: 
• 
Extreme temperatures, vibration and shock should be avoided as these 
may cause damage to the unit and give inaccurate forecasts and 
readings. 
• 
When cleaning the display and casings, use a soft damp cloth only. Do 
not use solvents or scouring agents as they may mark the LCD and 
casings. 
• 
Do not submerge the unit in water. Furthermore, fix all parts in place 
where the unit is adequately protected against moisture and rain. 
• 
Immediately remove all low powered batteries to avoid leakage and 
damage. Replace only with new batteries of the recommended type. 
• 
Do not make any repair attempts to the unit. Return them to their original 
point of purchase for repair by a qualified engineer. Opening and 
tampering with the unit may invalidate their guarantee. 
 
41