TE Connectivity 1-640251-2 Content: 1 pc(s) 1-640251-2 Informationshandbuch
Produktcode
1-640251-2
4
MT
A-50
.050
[1.27]
Product Facts
■
2–28 contact positions
■
Connectors terminate 26,
28 and 30 AWG discrete wire
or .050 [1.27] centerline rib-
bon cable
28 and 30 AWG discrete wire
or .050 [1.27] centerline rib-
bon cable
■
Color-coded housings
■
Maximum cable insulation
diameter of .039 [0.99] with
PVC insulation only
diameter of .039 [0.99] with
PVC insulation only
■
IDC contacts pre-loaded in
receptacle housing
receptacle housing
■
30 V, 1 A contact rating
■
Contact design allows for
gold-to-gold or tin-to-tin
interface
gold-to-gold or tin-to-tin
interface
■
Contacts are lubricated to
prevent fretting corrosion
prevent fretting corrosion
■
Wire feed-thru capability for
daisy-chain wiring or closed
end for point-to-point wiring
daisy-chain wiring or closed
end for point-to-point wiring
■
Connectors are polarized for
proper mating
proper mating
■
Manual and semiautomatic
application tooling
application tooling
■
Mating heights shown below:
■
Component Recognized by
Underwriters Laboratories
Inc. to US and Canadian
Standards,
File No. E28476
(Connectors and Headers)
File No. E53793
(Ribbon Cable)
Underwriters Laboratories
Inc. to US and Canadian
Standards,
File No. E28476
(Connectors and Headers)
File No. E53793
(Ribbon Cable)
The MTA-50 IDC Connector
System is a wire-to-printed cir-
cuit board system with con-
tacts in a staggered, single
row on .050 [1.27] centerline.
The design features wire feed-
through capability for daisy-
chain applications. Insulation
displacement contacts are
used to terminate a wide
range of conductor sizes.
Ribbon cable can also be ter-
minated when the appropriate
receptacle assembly and
strain relief cover are used.
System is a wire-to-printed cir-
cuit board system with con-
tacts in a staggered, single
row on .050 [1.27] centerline.
The design features wire feed-
through capability for daisy-
chain applications. Insulation
displacement contacts are
used to terminate a wide
range of conductor sizes.
Ribbon cable can also be ter-
minated when the appropriate
receptacle assembly and
strain relief cover are used.
Header assemblies for board
mount applications include
right-angle (horizontal) and
vertical mount products.
These are available in
mount applications include
right-angle (horizontal) and
vertical mount products.
These are available in
through-hole and surface
mount configurations.
mount configurations.
Typical uses of the MTA-50
IDC connectors would be in
the Appliance, Commercial
and Home Equipment and
Security products industries.
IDC connectors would be in
the Appliance, Commercial
and Home Equipment and
Security products industries.
See the following pages for
related products:
related products:
■
Ribbon Cable (reels), .050
[1.27] centerline (p. 71)
[1.27] centerline (p. 71)
■
Application Tooling (p. 76)
■
Cable Assemblies (p. 74)
Performance Data
Voltage Rating — 30 VAC
Current Rating — 1 amp max.
Low-Level Resistance —
30 milliohms
30 milliohms
Dielectric Withstanding Voltage —
500 VAC
500 VAC
Insulation Resistance —
1,000 megohms
1,000 megohms
Operating Temperature —
–55°C to +105°C for connector only;
cable rating may be lower
–55°C to +105°C for connector only;
cable rating may be lower
Technical Documents
Application Specification —
114-13072 MTA-50 Connectors
114-13072 MTA-50 Connectors
Product Specifications —
108-2113 MTA-50 Connectors
108-2113 MTA-50 Connectors
100-4703 MADISON CABLE Cable
Specification (28 AWG,
7/36 Tinned copper,
PVC insulation)
7/36 Tinned copper,
PVC insulation)
100-6257 MADISON CABLE Cable
Specification (28 AWG,
7/36 Tinned copper,
TPO insulation)
7/36 Tinned copper,
TPO insulation)
.503
[12.78]
or
.254
[6.45]
Max.
Vertical
Vertical
Max.
Right-Angle
Right-Angle
These matrixes have been
prepared to assist you in
defining the correct mating
halves for the MTA-50 header
and connector kit combina-
tion. Where a “Y” is indicated
the combination is a valid
mating pair.
prepared to assist you in
defining the correct mating
halves for the MTA-50 header
and connector kit combina-
tion. Where a “Y” is indicated
the combination is a valid
mating pair.
Note: Tyco Electronics does NOT rec-
ommend intermating connectors and
headers with different contact plat-
ings.
ommend intermating connectors and
headers with different contact plat-
ings.
1445120 1445121 1445169 1445172
Connector
Kits
1445343
Y Y Y Y
1445346
Y Y Y Y
1445349
Y Y Y Y
1445352
Y Y Y Y
1445355
Y Y Y Y
1445358
Y Y Y Y
1445361
Y Y Y Y
1445364
Y Y Y Y
1445367
Y Y Y Y
1445370
Y Y Y Y
1445373
Y Y Y Y
1445376
Y Y Y Y
1445125 1445126 1445171 1445174
Headers
Connector
Kits
Matrix for .000030 [0.00076]
Gold Plated Part Numbers
Gold Plated Part Numbers
1445342 Y Y Y Y
1445345 Y Y Y Y
1445348 Y Y Y Y
1445351 Y Y Y Y
1445354 Y Y Y Y
1445357 Y Y Y Y
1445360 Y Y Y Y
1445363 Y Y Y Y
1445366 Y Y Y Y
1445369 Y Y Y Y
1445372 Y Y Y Y
1445375 Y Y Y Y
1445123 1445124 1445170 1445173
Connector
Kits
Matrix for .000015 [0.00038]
Gold Plated Part Numbers
Gold Plated Part Numbers
Matrix for Tin Plated
Part Numbers
Part Numbers
1445341 Y Y Y Y
1445344 Y Y Y Y
1445347 Y Y Y Y
1445350 Y Y Y Y
1445353 Y Y Y Y
1445356 Y Y Y Y
1445359 Y Y Y Y
1445362 Y Y Y Y
1445365 Y Y Y Y
1445368 Y Y Y Y
1445371 Y Y Y Y
1445374 Y Y Y Y
Headers
Headers
MTA-50 IDC Connector Kit / Header Mateability Guide
MTA-50 IDC Connectors and Headers
MTA, CST-100 II, SL-156 and
AMP Economy Power (EP) Connectors
AMP Economy Power (EP) Connectors
Catalog 82056
Dimensions are in inches and
Dimensions are shown for
USA: 1-800-522-6752
South America: 55-11-2103-6000
Revised 6-08
millimeters unless otherwise
reference purposes only.
Canada: 1-905-470-4425
Hong Kong: 852-2735-1628
specified. Values in brackets
Specifications subject
Mexico: 52-55-1106-0800
Japan: 81-44-844-8013
www.tycoelectronics.com
are metric equivalents.
to change.
C. America: 57-1-254-4444
UK: 44-208-420-8341