Cisco IEC Rack Mounting Brackets 15454E-19IEC-KIT= Benutzerhandbuch
Produktcode
15454E-19IEC-KIT=
2
Installing IEC Rack Mounting Brackets on the ONS 15454 SDH Shelf Assembly
78-15831-02
Install the Mounting Brackets
Step 3
Align the mounting bracket screw holes against the shelf assembly screw holes according to
,
depending on whether you want to mount the shelf at the front or the center of the equipment rack. When
aligned properly the mounting flange will be 38 mm from the front edge of the shelf assembly when front
mounted (
aligned properly the mounting flange will be 38 mm from the front edge of the shelf assembly when front
mounted (
) and 114.5 mm when center mounted (
Step 4
Use a Phillips screwdriver to install the six screws and tighten.
Step 5
Repeat for the other side of the assembly.
Figure 1
Bracket Mounting Holes
115091
Front
mounting
holes
Center
mounting
holes
Screws in this
column will align to
this edge for center
mounting for the
three screws
column will align to
this edge for center
mounting for the
three screws
Screws in this
column will align to
this edge for center
mounting for the
three screws
Bracket front