Zoom H2N Benutzerhandbuch
R
ecording
R
ecording manually
24
R
ecording
R
ecording manually
25
H2n
Handy Recorder
Recording manually
1
2, 4
3
1.
Turn
to adjust the input level.
HINT
∙ Adjust the MIC GAIN so that the peak level stays around -12 dB.
∙ If an input signal is too strong, the MS/XY indicator on the top will flash
∙ If an input signal is too strong, the MS/XY indicator on the top will flash
immediately.
∙ The recorder can also adjust mic gain automatically. (➝ P.70)
∙ You can change the recording format beforehand. (➝ P.72)
∙ The mic can also be set to cut wind and other unwanted noise. (➝ P.66)
∙ You can change the recording format beforehand. (➝ P.72)
∙ The mic can also be set to cut wind and other unwanted noise. (➝ P.66)
2.
Press
to start recording.
3.
Press
to add a mark.
4.
Press
to stop recording.
NOTE
∙ One fi le can have a maximum of 99 marks.
∙ The mic can also be set to pause immediately after adding a mark. (➝ P.77)
∙ During recording, if the size of the fi le exceeds 2 GB, recording will continue in
∙ The mic can also be set to pause immediately after adding a mark. (➝ P.77)
∙ During recording, if the size of the fi le exceeds 2 GB, recording will continue in
a new fi le that will be created automatically.