Multitech MultiModem Wireless Modem GSM/GPRS with GPS MTCBA-G-GP-F1 Benutzerhandbuch
Produktcode
MTCBA-G-GP-F1
Chapter 2 – Setup and Configuration
Multi-Tech Systems, Inc. MultiModem Wireless EDGE, GPRS, and CDMA Modems with GPS (S000376A)
14
2. Hardware Setup
1.
Using an RS-232 cable, connect a workstation to the GPS connector on the MultiModem.
2.
Attach both antennas (included in your ship kit). The GPS antenna is a 50 ohm SMA antenna. The
GSM/ CDMA antenna is a standard SMA antenna.
GSM/ CDMA antenna is a standard SMA antenna.
3.
Plug one end of the power cord into the device and the other end into a live power outlet. The
PWR
LED lights up.
Warning:
Do not connect your wireless modem directly to a vehicle’s battery
for your power source. Doing so may cause power spikes. If you wish to use
the battery as a power source, add a filtering device to the DC input.
the battery as a power source, add a filtering device to the DC input.
3. Verify the GPS Connection
The workstation should be running a utility, such as iQ_Monitor, to monitor GPS satellite signals.
iQ_Monitor is included on the product CD with the MultiModem Developer’s Kit.
iQ_Monitor is included on the product CD with the MultiModem Developer’s Kit.