Multitech MultiModem Wireless Modem GSM/GPRS with GPS MTCBA-G-GP-F1 Benutzerhandbuch
Produktcode
MTCBA-G-GP-F1
Chapter 1 – Introduction and Product Description
Multi-Tech Systems, Inc. MultiModem Wireless EDGE, GPRS, and CDMA Modems with GPS (S000376A)
6
Safety Recommendations for Rack Installations
•
Ensure proper installation in a closed or multi-unit enclosure by following the recommended installation
as defined by the enclosure manufacturer.
as defined by the enclosure manufacturer.
•
If installing the wireless modem in a closed or multi-unit enclosure, ensure adequate airflow so that the
maximum recommended ambient temperature is not exceeded.
maximum recommended ambient temperature is not exceeded.
•
Do not place the device directly on top of other equipment or place other equipment directly on top of
this device.
this device.
•
Ensure that the device is properly connected to earth ground via a grounded power cord. If a power
strip is used, ensure that the power strip also provides adequate grounding.
strip is used, ensure that the power strip also provides adequate grounding.
•
Ensure that the main supply circuit is capable of handling the load. See the power label on the device
for requirements.
for requirements.
•
Maximum ambient temperature is 70 degrees Celsius.
•
This device should be installed by properly qualified personnel.
•
Only connect like circuits; e.g., connect SELV (Secondary Extra Low Voltage) circuits to SELV circuits
and TN (Telecommunications Network) circuits to TN circuits.
and TN (Telecommunications Network) circuits to TN circuits.
Ship Kit Contents
The single wireless modem is shipped with the following:
•
One MultiModem GPRS/EDGE/CDMA wireless modem with GPS functionality.
•
One fused DC power cable.
•
Four rubber feet for desktop placement.
•
Printed Activation Customer Notices (for Cingular, Sprint, Verizon networks, and general CDMA
activation).
activation).
•
One printed Quick Start Guide.
•
One MultiModem CD that provides documentation, two GPS utility programs (iQ Monitor.exe and iQ
Chat.exe), and Adobe Acrobat Reader.
Chat.exe), and Adobe Acrobat Reader.
The GPS Developer Kit is shipped with the following:
•
Three power cords.
•
One fused DC power cable.
•
One universal power supply.
•
Two serial cables.
•
Some international kits may have three antennas (two wireless antennas and one GPS antenna).
•
Printed Customer Activation Notices (for Cingular, Sprint, Verizon networks, and general CDMA
activation).
activation).
•
One printed Quick Start Guide.
•
One MultiModem CD that provides documentation, two GPS utility programs (iQ Monitor.exe and iQ
Chat.exe), and Adobe Acrobat Reader.
Chat.exe), and Adobe Acrobat Reader.