Infocus LP120 COACH DLP-PROJECTOR LP120-COACH Benutzerhandbuch
Produktcode
LP120-COACH
11
Connecting a video device
Standard video connections
Plug the S-video cable’s connector into the S-video-out connector on the
video device. Plug the other connector into the S-Video connector on the
projector.
video device. Plug the other connector into the S-Video connector on the
projector.
Plug the white connector of the audio adapter into the left audio out con-
nector on the video device and plug the red connector into the right audio
out connector on the video device.
nector on the video device and plug the red connector into the right audio
out connector on the video device.
Plug the audio cable into the other end of the audio cable adapter and into
the audio in connector on the projector.
the audio in connector on the projector.
Connect the black power cable to the connector on the side of the projector
and to your electrical outlet. The Power LED on the keypad turns solid
green and the fans start to run.
and to your electrical outlet. The Power LED on the keypad turns solid
green and the fans start to run.
NOTE
: Always use the power cable that shipped with the projector.
Optional video connections
If the video device uses a composite video connector, plug a composite
video cable (sold separately) into the composite connector on the video
device and into the S-video adapter. Plug the S-video adapter into the
S-video
video cable (sold separately) into the composite connector on the video
device and into the S-video adapter. Plug the S-video adapter into the
S-video
connector on the projector. Use the audio cables as described above.
connect S-video cable and
audio cable and adapter
audio cable and adapter
connect power cable
connect composite video cable and adapter
and audio cable and adapter
and audio cable and adapter