Insys Modem 56k 4.1 11-02-01-01-40.028 Benutzerhandbuch
Produktcode
11-02-01-01-40.028
INSYS Modem 336/56k 4.1 (UL)
Functions
The deactivation takes place by deleting the call back phone
number.
number.
5.11.3.2 Operation
Establishing a connection to the remote modem by
entering the AT command.
The connection to the modem is established.
The modem responds to an incoming call.
You must now enter the “Remote Password”, which is
identical to the password for the remote configuration.
(default: QWERTY)
After the password has been entered correctly, the modem
hangs up and after about 10 seconds dials the stored phone
number. Altogether, 3 dialing attempts with a pause of 10
seconds between each attempt are performed.
If the entered password was incorrect, the connection is ter-
minated and thus prevents unauthorized access to the con-
nected device.
entering the AT command.
The connection to the modem is established.
The modem responds to an incoming call.
You must now enter the “Remote Password”, which is
identical to the password for the remote configuration.
(default: QWERTY)
After the password has been entered correctly, the modem
hangs up and after about 10 seconds dials the stored phone
number. Altogether, 3 dialing attempts with a pause of 10
seconds between each attempt are performed.
If the entered password was incorrect, the connection is ter-
minated and thus prevents unauthorized access to the con-
nected device.
After that, a normal data connection is established.
ATD <phone number>
Connect
SECURITY CALLBACK
REMOTE PASSWORD:
QWERTY
OK
No Carrier
No Carrier
Callback in
Progress
Progress
July 06
37