Texas Instruments Audio Power Amplifier Evaluation Module TPA1517DWPEVM TPA1517DWPEVM Datenbogen
Produktcode
TPA1517DWPEVM
8
Layout Definition
U1 - TPA1517PWP
stereo 5 W Audio Amplifier
stereo 5 W Audio Amplifier
C1, 2, 6, 7 - Capacitor, 1.0
µ
F, Ceramic
C3, 4 - Capacitor, 470
µ
F 16 V Alum Elect
C5 - Capacitor, 2.2
µ
F, Ceramic
C8 - Capacitor, 100
µ
F, 25 V Alum Elect
R1, 2 - Potentiometer, 50 k
Ω
, 3/4 Turn
R3, 4, 9 - Resistor, 10 k
Ω
Carbon
R5, 6 - Resistor, 47 k
Ω
Carbon
R7, 10 - Resistor, 1 k
Ω
Carbon
R8, - Resistor, 6.8 k
Ω
Carbon
R11 - Resistor, 220
Ω
Carbon
S1, 2, - Jumper
S3, - Switch, Norm Open, Momentary
S3, - Switch, Norm Open, Momentary
TPA1517
Q1, 2 -Transistor, FMMT3904
1.3 Operation Notes
The TPA1517DWP EVM (SLOP106) was designed to plug into TI’s P-n-P
Audio Evaluation Platform (SLOP097). Slot U2 on the P-n-P is compatible
with the TPA1517DWP EVM. No soldering is required for use in the P-n-P
system. Standard speaker jacks, RCA jacks and 1/8” headphone jacks are
provided on the P-n-P for quick and easy evaluation of all TI TPA series audio
power amplifiers. The TPA1517 is designed to drive 4 ohm speakers up to 6
W.
Audio Evaluation Platform (SLOP097). Slot U2 on the P-n-P is compatible
with the TPA1517DWP EVM. No soldering is required for use in the P-n-P
system. Standard speaker jacks, RCA jacks and 1/8” headphone jacks are
provided on the P-n-P for quick and easy evaluation of all TI TPA series audio
power amplifiers. The TPA1517 is designed to drive 4 ohm speakers up to 6
W.