Texas Instruments TLV320AIC3262 USB EVM AIC3262-STICKEVM AIC3262-STICKEVM Datenbogen
Produktcode
AIC3262-STICKEVM
I C connector on TLV320AIC3262 stick EVM
2
1.
SCL
2.
SDA
3.
GND
4.
IOV
DD
Appendix A
SLAU448 – June 2012
TLV320AIC3262 Stick EVM EEPROM
Image Programming Guide
1. Install the TotalPhaseUSB-v2.10 driver using TotalPhaseUSB-v2.10.exe. This driver installation file is
located at:
2. Open the Aardvark™ GUI by double-clicking on Aardvark GUI.exe. Aardvark GUI is located at:
3. Setup the hardware.
•
Build the I
2
C
®
(SDA, SCL, IOV
DD
, GND) connection between the Aardvark GUI and the
TLV320AIC3262 stick EVM.
SCL
SDA
NC + 5 V
GND
Aardvark GUI
1
3
4
2
TLV320AIC3262 I
2
C connector
1
2
4
3
•
Connect the Aardvark GUI to a PC through USB cable. Now the Aardvark GUI will be recognized
as the Total Phase Aardvark I
as the Total Phase Aardvark I
2
C/SPI Host Adaptor under the windows device manager.
4. Program the TUSB3200 firmware (
•
Open the Aardvark GUI and click Configure Aardvark Adaptor
•
Highlight the Aardvark port and select Batch Mode, then click okay.
12
TLV320AIC3262 Stick EVM EEPROM Image Programming Guide
SLAU448 – June 2012
Copyright © 2012, Texas Instruments Incorporated