Texas Instruments TUSB9261 Demonstration & Reference Design TUSB9261DEMO TUSB9261DEMO Datenbogen
Produktcode
TUSB9261DEMO
SLLU139 – February 2011
Power Switch
The DEMO Baord uses a TI TPS2561 power switch. This switch serves two purposes. It limits the amount
of in-rush current on VBUS and it allows power to the SATA connector to be switched via the TUSB9261.
The switch is controlled via GPIO10 from the TUSB9261 and power faults can be monitored by GPIO11.
By default the DEMO Board is configured to always apply power to the SATA connector and power faults
are not monitored.
of in-rush current on VBUS and it allows power to the SATA connector to be switched via the TUSB9261.
The switch is controlled via GPIO10 from the TUSB9261 and power faults can be monitored by GPIO11.
By default the DEMO Board is configured to always apply power to the SATA connector and power faults
are not monitored.
9
SLLU139 – February 2011
Power Switch
© 2011, Texas Instruments Incorporated