Texas Instruments BUF08630EVM - BUF08630 Evaluation Module BUF08630EVM BUF08630EVM Datenbogen
Produktcode
BUF08630EVM
Required External
Connections
DC Power for
USB_Dig_Platform
9V
GND
USB Cable
Supply
Max = 20V
www.ti.com
BUF08630EVM Hardware Overview
3
BUF08630EVM Hardware Overview
The BUF08630EVM hardware overview involves connecting the two PCBs of the EVM together, applying
power, connecting the USB cable, and setting the jumpers. This section presents the details of this
procedure.
power, connecting the USB cable, and setting the jumpers. This section presents the details of this
procedure.
3.1
Electrostatic Discharge Warning
CAUTION
Many of the components on the BUF08630EVM are susceptible to damage by
electrostatic discharge (ESD). Customers are advised to observe proper ESD
handling precautions when unpacking and handling the EVM, including the use
of a grounded wrist strap at an approved ESD workstation.
electrostatic discharge (ESD). Customers are advised to observe proper ESD
handling precautions when unpacking and handling the EVM, including the use
of a grounded wrist strap at an approved ESD workstation.
3.2
Typical Hardware Connections
To set up the BUF08630EVM hardware, connect the two PCBs of the EVM together, and apply a power
source to the BUF08630_Test_Board. The external connections may be the real-world system that the
BUF08630 will be incorporated into.
source to the BUF08630_Test_Board. The external connections may be the real-world system that the
BUF08630 will be incorporated into.
illustrates the typical hardware connections.
Figure 5. Typical Hardware Connections for BUF08630EVM
7
SBOU091 – September 2010
BUF08630EVM User Guide and Software Tutorial
Copyright © 2010, Texas Instruments Incorporated