Texas Instruments TPS22908EVM-025 Evaluation Module TPS22908EVM-025 TPS22908EVM-025 Datenbogen

Produktcode
TPS22908EVM-025
Seite von 15
Introduction
1
Introduction
The TPS22907/08EVM-025 evaluation module (EVM) allows the user to connect power to and control the
Ultra Small CSP-4 package load switch. Parameters such as On State resistance, Slew Rate and
Discharge properties can be easily evaluated.
Table 1. TPS22907 / TPS22908 VOUT Rise Time, Enable, and Output Discharge Options
Rise Time (µs)
Enable
Quick Output
EVM
Device
VIN (V)
Typical
(ON Pin)
Discharge
HVL025-001
TPS22907
25
1.1 V – 3.6 V
Active High
No
HVL025-002
TPS22908
100
1.0 V – 3.6 V
Active High
Yes
2
Description
The TPS22907/08EVM-025 contains a P-channel MOSFET switch that operates over an input voltage
range discussed in Table 1. The switch is controlled by an on/off input (ON), which is capable of
interfacing directly with low voltage control signals.
2.1
Typical Applications
Battery Powered Equipment
Portable Industrial Equipment
Portable Medical Equipment
Portable Media Players
Smart phones / Tablets
Digital Cameras
GPS Devices
2.2
Features
Ultra Low On State Resistance
1A Maximum Continuous Switch Current
Controlled Slew Rate to Avoid Inrush Currents
3
Electrical Performance
Refer to the TPS22907 and TPS22908 Datasheets for the electrical performance limits of each device
type.
4
Operation
4.1
Equipment
Voltage Sources:
DC supply will be used.
DC Supply capable of 5V, 3A.
Multimeters:
Multi Meter for measuring switch voltage drop and VOUT voltage.
Output Load:
Variable load connected to VOUT, observe power rating,
Oscilloscope:
2 channel 100MHz
Recommended Wire Gauge: 18 AWG
2
Using the TPS22907-08EVM-025 Single Channel Load Switch IC
SLVU765 – October 2012
Copyright © 2012, Texas Instruments Incorporated