Cypress Semiconductor CY3280-MBR3 Benutzerhandbuch
6
CY3280-MBR3 Evaluation Kit User Guide, Doc. #: 001-89905 Rev. *B
Safety Information
General Safety Instructions
ESD Protection
ESD can damage boards and associated components. Cypress recommends that you perform
procedures only at an ESD workstation. If an ESD workstation is not available, use appropriate ESD
protection by wearing an antistatic wrist strap attached to chassis ground (any unpainted metal
surface) on your board when handling parts.
procedures only at an ESD workstation. If an ESD workstation is not available, use appropriate ESD
protection by wearing an antistatic wrist strap attached to chassis ground (any unpainted metal
surface) on your board when handling parts.
Handling Boards
CY3280-MBR3 boards are sensitive to ESD. Hold the board only by its edges. After removing the
board from its box, place it on a grounded, static-free surface. Use a conductive foam pad if
available. Do not slide board over any surface.
board from its box, place it on a grounded, static-free surface. Use a conductive foam pad if
available. Do not slide board over any surface.