Panasonic HDC-SD9EG-K Benutzerhandbuch

VQT1N58

This unit will resume recording/pause mode 
about 0.6 seconds after the LCD monitor is 
reopened.
≥ When in quick start standby mode about 

Select the menu. (l 21)

The status indicator A flashes green and the unit 
goes into quick start standby mode.
≥ The lens cover does not close.

The status indicator A lights red and the unit is 
put into recording pause approx. 0.6 seconds 
after it is turned on.
≥ Set [QUICK START] to [OFF] to cancel the 

quick start mode.

≥ Quick start standby mode is cancelled if

jabout 5 minutes elapsed
jSet the mode switch to 
jTurn the unit off

≥ In the 25p digital cinema setting, the required 

time for the quick start operation is slightly 
longer than 0.6 seconds.

≥ In the quick start mode, it may take some time 

for automatic white balance to adjust, if the 
scene being recorded has a light source 
different from the scene last recorded. (When 
the colour night view function is used, however, 
the white balance of the scene last recorded is 
retained.)

≥ In the quick start mode, the zoom 

magnification becomes 1k and the picture size 
may differ from what it was before quick start 
standby mode.

≥ If [POWER SAVE] (

l 22) is set to 

[5 MINUTES] and the unit automatically goes 
into quick start standby mode, close the LCD 
monitor and then open it again.

≥ If the unit is exposed to vibration or shock, the 

time for the quick start mode may be slightly 
longer than 0.6 seconds.

This allows recording of the pictures and sound 
to start approximately 3 seconds before the 
recording start/stop button is pressed.

[

] appears on the screen and the unit 

repeats the update by recording motion pictures 
for about 3 seconds onto the built-in memory and 
then deleting them.
≥ Aim this unit at the subject and position it 

≥ Press the PRE-REC button again to cancel the 

setting.

≥ Images and audio are recorded for about 

3 seconds before pressing the recording start/
stop button.

≥ There is no beep sound.
≥ After recording starts, the PRE-REC setting is 

cancelled.

≥ To use the PRE-REC function again, press the 

PRE-REC button again.

# [QUICK START] # [ON]

PRE-REC

HDCSD9EP-VQT1N58_eng.book  35 ページ  ２００８年１月１０日　木曜日　午後９時３６分