Texas Instruments TX517EVM Evaluation Module TX517EVM TX517EVM Datenbogen

Produktcode

TX517EVM

Buttons

www.ti.com

Buttons

There are eight buttons for controlling the output waveform settings. They are listed in

Table 1

Table 1. Buttons

Button

Functionality

PHASE_BUTTON

Each time the button is pressed, the current INPx pattern becomes the pattern for INNx, the current
INNx pattern becomes the pattern for INPx.

PRF_BUTTON

Changes the Pulse Repetition Frequency of the output waveform as given in

Table 2

Each press

increases the PRF and then cycles back to 0.

CYCLE_BUTTON

Changes the number of times the output pattern cycles within the pulse burst, as given in the

Table 3

Each press moves 1 level up and then back to 0

FREQ_BUTTON

Changes the Frequency of the output waveform as given in the

Table 4

. Each press increases the

frequency and then cycles back to 0

RESET_BUTTON

Reset all the setting to its default

PDM_BUTTON

One press changes the mode to Power down mode.

CW_MODE_BUTTON

First six times the button is pressed will change the pattern depth as shown in

Table 5

. Seventh press

will change the device to CW mode. In CW mode, pressing the button will revert back to 17-level. The
latch mode is unaffected. Refer to

Table 5

and

Table 6

LATCH_MODE_BUTTON

First press changes to latch mode. Every consecutive pulse will toggle the mode between Latch and
Non latch mode

Table 2. PRF

Index

PRF(kHz)

Comments

0.5

17-level Ramp Only

Table 3. Cycle

Index

PRF (kHz)

Comments

Longer than 5-level Only

Table 4. Frequency

Index

Frequency (MHz)

Comments

100

TX517 Dual Channel, 17-Level With RTZ, Integrated Ultrasound Transmitter

SLOU317B

–

August 2011

–

Revised December 2011

Submit Documentation Feedback

2011, Texas Instruments Incorporated