Texas Instruments Evaluation Module for TPS62690 TPS62690EVM-076 TPS62690EVM-076 Datenbogen
Produktcode
TPS62690EVM-076
TPS62690/1/2/3EVM Assembly Drawing and Layout
6
TPS62690/1/2/3EVM Assembly Drawing and Layout
through
show the design of the TPS62690/1/2/3EVM-076 printed-circuit boards
(PCB). The EVM has been designed using a two-layer, 1-ounce copper-clad PCB with all components in
an active area on the top side of the board. Moving components to both sides of the PCB or using
additional internal layers can offer additional size reduction for space-constrained systems.
an active area on the top side of the board. Moving components to both sides of the PCB or using
additional internal layers can offer additional size reduction for space-constrained systems.
NOTE:
Board layouts are not to scale. These figures show how the board is laid out; they are not
intended to be used for manufacturing TPS62690/1/2/3EVM-076 PCBs. Note the connection
of the TPS6269x feedback (FB) pin. It is recommended that the FB pin be connected directly
to the inductor, not directly on the VOUT connection of the output capacitor. The connection
to the inductor provides better transient response performance.
of the TPS6269x feedback (FB) pin. It is recommended that the FB pin be connected directly
to the inductor, not directly on the VOUT connection of the output capacitor. The connection
to the inductor provides better transient response performance.
Figure 10. TPS62690/1/2/3EVM Component Placement (Top View)
10
TPS6269xEVM-076 Evaluation Module
SLVU529A
–
September 2011
–
Revised November 2011
Copyright
©
2011, Texas Instruments Incorporated