Texas Instruments TPS65185EVM Evaluation Module TPS65185EVM TPS65185EVM Datenbogen
Produktcode
TPS65185EVM
Other Functions
7
Other Functions
•
To clear the GUI panel, press the “CLEAR ALL” button. Note that this function has no effect on the
TPS65185. This function is useful to verify that “READ ALL” function is working properly.
TPS65185. This function is useful to verify that “READ ALL” function is working properly.
•
Individual registers can be read and written to using the READ and WRITE buttons. The data is
displayed in HEX format.
displayed in HEX format.
•
The default setting for the GUI is to update the register settings immediately after the user changes
values. Select “MANUAL” update control if you wish to change multiple values before writing to the
TPS65185.
values. Select “MANUAL” update control if you wish to change multiple values before writing to the
TPS65185.
•
The GUI periodically polls the TMST_VAL, ENABLE, INT1, INT2, and PG_STAT registers to reflect the
current status of the device. The polling interval can be adjusted by the user by entering a number
below the "AUTO POLL" button. Release the "AUTO POLL" button to disable automatic polling.
current status of the device. The polling interval can be adjusted by the user by entering a number
below the "AUTO POLL" button. Release the "AUTO POLL" button to disable automatic polling.
9
SLVU548 – October 2011
Copyright © 2011, Texas Instruments Incorporated