Texas Instruments Three Input, Thirteen Output, Clock Jitter Cleaner with Dual Cascaded PLLs and Integrated 2.5 GHz VC L LMK04816BEVAL/NOPB Datenbogen

 
Clicking on the cyan-colored PLL2 block that contains R, PDF and N values will bring the 
PLL2 tab into focus where these values may be modified, if needed.   
 
Clicking on the values in the box containing the Internal Loop Filter component (R3, C3, R4, 
C4) allow one to step through the possible values.  Left click to increase the component value, 
and right click to decrease the value.  These values can also be changed in the Bits/Pins tab. 
 
The Reference Oscillator value field may be changed in either the Clock Outputs tab or the 
PLL2 tab.  The PLL2 Reference frequency should match the frequency of the onboard VCXO or 
Crystal (i.e. VCO frequency in the PLL1 tab); if not, a warning message will appear to indicate 
that the PLL(s) may be out of lock, as highlighted by the red box in Figure 10.