Texas Instruments Three Input, Thirteen Output, Clock Jitter Cleaner with Dual Cascaded PLLs and Integrated 2.5 GHz VC L LMK04816BEVAL/NOPB Datenbogen
Produktcode
LMK04816BEVAL/NOPB
L M K 0 4 8 1 6 E V A L U A T I O N B O A R D O P E R A T I N G I N S T R U C T I O N S
SNLU107
7
Example: Using CodeLoader to Program the LMK04816
The purpose of this section is to walk the user through using CodeLoader 4 to make some
measurements with the LMK04816 device as an example. For more information on CodeLoader
refer to Appendix A: CodeLoader Usage or the CodeLoader 4 instructions located at
measurements with the LMK04816 device as an example. For more information on CodeLoader
refer to Appendix A: CodeLoader Usage or the CodeLoader 4 instructions located at
1. Start CodeLoader 4 Application
Click “Start” “Programs” “CodeLoader 4” “CodeLoader 4”
The CodeLoader 4 program is installed by default to the CodeLoader 4 application group.
The CodeLoader 4 program is installed by default to the CodeLoader 4 application group.
2. Select Device
Click “Select Device” “Clock Conditioners” “LMK04816”
Once started CodeLoader 4 will load the last used device. To load a new device click “Select
Device” from the menu bar, then select the subgroup and finally device to load. For this
example, the LMK04816B is chosen. Selecting the device does cause the device to be
programmed.
Once started CodeLoader 4 will load the last used device. To load a new device click “Select
Device” from the menu bar, then select the subgroup and finally device to load. For this
example, the LMK04816B is chosen. Selecting the device does cause the device to be
programmed.
Figure 3 – Selecting the LMK04816B device