Texas Instruments TLV320AIC3110EVM-U Evaluation Module TLV320AIC3110EVM-U TLV320AIC3110EVM-U Datenbogen
Produktcode
TLV320AIC3110EVM-U
Control Software
www.ti.com
Figure 3. Command Dialog
•
The main area of the command dialog is the command buffer (editable text) which contains the
command script. To run the command script, click the Run button.
command script. To run the command script, click the Run button.
•
The smaller read only text area on the right side of the command dialog displays control data read
from the TI audio codec. The Clear button clears the Read Data field.
from the TI audio codec. The Clear button clears the Read Data field.
•
The one line text edit field on the left bottom allows single command execution.
•
The Record check box enables recording of commands generated by the control software.
shows a recording of the volume control for the left Class-A/B HP Driver amplifier of a
TLV320AIC3111 (note that the Record checkbox is checked).
A single command to read four bytes starting at address 0x28 was executed and the result is displayed in
the Read Data field.
the Read Data field.
2.5.3
Register Inspector
The register inspector dialog (View
→
Register Inspector…) gives access to all registers of the TI audio
codec.
6
ACEV-1A EVM
SLAU307 – February 2010
Copyright © 2010, Texas Instruments Incorporated