Texas Instruments LM96080 Evaluation Board LM96080EB/NOPB LM96080EB/NOPB Datenbogen
Produktcode
LM96080EB/NOPB
SNAS465D – SEPTEMBER 2009 – REVISED MARCH 2013
Value RAM—Address 20h–3Fh
(1)
Address A7–A0
Description
20h
IN0 reading (10-bit)
21h
IN1 reading (10-bit)
22h
IN2 reading (10-bit)
23h
IN3 reading (10-bit)
24h
IN4 reading (10-bit)
25h
IN5 reading (10-bit)
26h
IN6 reading (10-bit)
27h
Temperature reading (9-bit or 12-bit for easy read-back)
28h
FAN1 reading
Note: This location stores the number of counts of the internal clock per revolution.
Note: This location stores the number of counts of the internal clock per revolution.
29h
FAN2 reading
Note: This location stores the number of counts of the internal clock per revolution.
Note: This location stores the number of counts of the internal clock per revolution.
2Ah
IN0 High Limit
2Bh
IN0 Low Limit
2Ch
IN1 High Limit
2Dh
IN1 Low Limit
2Eh
IN2 High Limit
2Fh
IN2 Low Limit
30h
IN3 High Limit
31h
IN3 Low Limit
32h
IN4 High Limit
33h
IN4 Low Limit
34h
IN5 High Limit
35h
IN5 Low Limit
36h
IN6 High Limit
37h
IN6 Low Limit
38h
Hot Temperature Limit (High)
39h
Hot Temperature Hysteresis Limit (Low)
3Ah
OS Temperature Limit (High)
3Bh
OS Temperature Hysteresis Limit (Low)
3Ch
FAN1 Fan Count Limit
Note: It is the number of counts of the internal clock for the Low Limit of the fan speed.
Note: It is the number of counts of the internal clock for the Low Limit of the fan speed.
3Dh
FAN2 Fan Count Limit
Note: It is the number of counts of the internal clock for the Low Limit of the fan speed.
Note: It is the number of counts of the internal clock for the Low Limit of the fan speed.
3Eh
Manufacturer's ID always defaults to 0000 0001; this register is writable and can be reset to the default value by the
INITIALIZATION bit in the Configuration Register (address 00h, bit 7).
INITIALIZATION bit in the Configuration Register (address 00h, bit 7).
3Fh
Stepping/Die Revision ID always defaults to 0000 1000; this register is writable and can be reset to the default
value by the INITIALIZATION bit in the Configuration Register.
value by the INITIALIZATION bit in the Configuration Register.
(1)
Setting all ones to the high limits for voltages and fans (0111 1111 binary for temperature) means interrupts will never be generated
except the case when voltages go below the low limits.
For voltage input high limits, the device is doing a greater than comparison. For low limits, however, it is doing a less than or equal to
comparison.
except the case when voltages go below the low limits.
For voltage input high limits, the device is doing a greater than comparison. For low limits, however, it is doing a less than or equal to
comparison.
28
Copyright © 2009–2013, Texas Instruments Incorporated
Product Folder Links: