Texas Instruments MSP430F55xx 64-Pin Target board only MSP-TS430RGC64USB MSP-TS430RGC64USB Datenbogen
Produktcode
MSP-TS430RGC64USB
Kit Contents, EM430Fx1x7RF900
Table 1-2. Individual Kit Contents, MSP-TS430xx (continued)
Part Number
Socket Type
Supported Devices
Included Devices
Headers and Comment
MSP430F665x,
MSP-TS430PZ100USB
100-pin PZ
Eight PCB 1×25-pin headers (four male
MSP430F663x,
2 x MSP430F6638IPZ
(green PCB)
(QFP ZIF)
and four female)
MSP430F563x
MSP430F677x,
MSP430F676x,
MSP430F676x,
Four PCB 1x26-pin headers (two male
MSP-TS430PEU128
128-pin PEU
MSP430F674x,
2 x MSP430F67791IPEU
and two female) and four PCB 1x38-pin
(green PCB)
(QFP ZIF)
MSP430F677x1,
headers (two male and two female)
MSP430F676x1,
MSP430F674x1
See the device data sheets for device specifications. Device errata can be found in the respective device
product folder on the web provided as a PDF document. Depending on the device, errata may also be
found in the device bug database at
product folder on the web provided as a PDF document. Depending on the device, errata may also be
found in the device bug database at
1.13 Kit Contents, EM430Fx1x7RF900
•
One READ ME FIRST document
•
One legal notice
•
Two target socket module
MSP-EM430F5137RF900: Two EM430F5137RF900 target socket modules. This is the PCB on which
is soldered a CC430F5137 device in a 48-pin RGZ package. A 2×7-pin male connector is also present
on the PCB
is soldered a CC430F5137 device in a 48-pin RGZ package. A 2×7-pin male connector is also present
on the PCB
MSP-EM430F6137RF900: Two EM430F6137RF900 target socket modules. This is the PCB on which
is soldered a CC430F6137 device in a 64-pin RGC package. A 2×7-pin male connector is also present
on the PCB
is soldered a CC430F6137 device in a 64-pin RGC package. A 2×7-pin male connector is also present
on the PCB
MSP-EM430F6147RF900: Two EM430F6147RF900 target socket modules. This is the PCB on which
is soldered a CC430F6147 device in a 64-pin RGC package. A 2×7-pin male connector is also present
on the PCB
is soldered a CC430F6147 device in a 64-pin RGC package. A 2×7-pin male connector is also present
on the PCB
•
Two CC430EM battery packs
•
Four AAA batteries
•
Two 868- or 915-MHz antennas
•
Two 32.768-kHz crystals
•
18 PCB 2×4-pin headers
1.14 Hardware Installation, MSP-FET430PIF
Follow these steps to install the hardware for the MSP-FET430PIF tools:
1. Use the 25-conductor cable to connect the FET interface module to the parallel port of the PC. The
necessary driver for accessing the PC parallel port is installed automatically during CCS or IAR
Embedded Workbench installation. Note that a restart is required after the CCS or IAR Embedded
Workbench installation for the driver to become active.
Embedded Workbench installation. Note that a restart is required after the CCS or IAR Embedded
Workbench installation for the driver to become active.
2. Use the 14-conductor cable to connect the parallel-port debug interface module to a target board, such
as an MSP-TS430xxx target socket module. Module schematics and PCBs are shown in
16
Get Started Now!
SLAU278Q – May 2009 – Revised February 2014
Copyright © 2009–2014, Texas Instruments Incorporated