Texas Instruments BUF18830 Evaluation Module BUF18830EVM BUF18830EVM Datenbogen
Produktcode
BUF18830EVM
+6V dc wall
supply
BUF18830
Test Board
BUF18830
Analog Supply
USB Dig Platform
Outputs
Measurement
Device
BUF18830EVM Hardware Setup
www.ti.com
1.2
Related Documentation from Texas Instruments
The following documents provide information regarding Texas Instruments' integrated circuits used in the
assembly of the BUF18830EVM. This user's guide is available from the TI web site under literature
number SBOU103. Any letter appended to the literature number corresponds to the document revision
that is current at the time of the writing of this document. Newer revisions may be available from the
assembly of the BUF18830EVM. This user's guide is available from the TI web site under literature
number SBOU103. Any letter appended to the literature number corresponds to the document revision
that is current at the time of the writing of this document. Newer revisions may be available from the
, or call the Texas Instruments' Literature Response Center at (800) 477-8924 or the Product
Information Center at (972) 644-5580. When ordering, identify the document by both title and literature
number.
number.
Related Documentation
Document
Literature Number
BUF18830 Product Data Sheet
USB_DIG_Platform User Guide
2
BUF18830EVM Hardware Setup
shows the system setup for the BUF18830EVM. The PC runs software that communicates with
the USB_DIG_Platform. The USB_DIG_Platform generates the analog and digital signals used to
communicate with the BUF18830. Connectors on the BUF18830 test board allow the user to connect to
the system under test conditions and monitor the power, current, and voltage.
communicate with the BUF18830. Connectors on the BUF18830 test board allow the user to connect to
the system under test conditions and monitor the power, current, and voltage.
Figure 2. BUF18830EVM Hardware Setup
4
BUF18830EVM User Guide and Software Tutorial
SBOU103 – April 2011
© 2011, Texas Instruments Incorporated