Texas Instruments EZ430-CHRONOS-868 Benutzerhandbuch
eZ430-Chronos Control Center PC Software
www.ti.com
3.3.4 BlueRobin™ Heart Rate Simulator
This mode simulates an active heart rate chest belt. Besides the heart rate it may also be used to transfer
speed and distance data from the PC to the eZ430-Chronos watch.
speed and distance data from the PC to the eZ430-Chronos watch.
Pairing watch and PC:
1. Activate link on the PC by clicking on "Start Transmitter". The Control Center status line displays
"Transmitting heart rate (...bpm), speed (...km/h) and distance (...m)" when the PC is transmitting data.
The heart rate may be changed by the heart rate and speed sliders or by selecting "sweep" for
automatic heart rate and speed sweeping
The heart rate may be changed by the heart rate and speed sliders or by selecting "sweep" for
automatic heart rate and speed sweeping
2. Select heart rate mode (heart symbol is shown) by pushing the "*" button (see detailed description in
).
3. Start receiver on watch by pushing the "UP" button
4. After a short moment, the current heart rate is displayed
4. After a short moment, the current heart rate is displayed
Speed can be selected by pushing the "*" button
Calories can be selected by pushing the "#" button
Distance can be selected by pushing the "DOWN" button in Calorie Mode (see
Calories can be selected by pushing the "#" button
Distance can be selected by pushing the "DOWN" button in Calorie Mode (see
).
5. The reception may be stopped by pushing "UP" while the heart rate is shown
Figure 3-7. eZ430-Chronos Control Center Heart Rate Simulator
36
eZ430-Chronos Software
SLAU292D – November 2009 – Revised March 2011
© 2009–2011, Texas Instruments Incorporated