Texas Instruments BQ24271EVM-758 Evaluation Module BQ24271EVM-758 BQ24271EVM-758 Datenbogen

Produktcode

BQ24271EVM-758

Test Summary

www.ti.com

Figure 5. Main Window of bq2427x EVM Evaluation Software

2.4

Recommended Test Procedure

The following test procedure is useful in evaluating the charger IC outside of a real system, especially
when no battery is available to connect to the output (i.e., Load #1).

2.4.1

System Voltage and Default Charge Settings

1. Ensure that the

Section 2.3

steps are followed.

2. Connect the output of PS #1 in series with CM #1 to J2 (USB, GND).

3. Connect voltage meter 1 (VM #1) across J1 or TP2 and J3 (USB, GND).

4. With PS #2 disabled, turn on PS #1.

5. Ensure the electronic load is on current mode and set the current to 1 A or turn down the resistor

decade box until CM #3 measures 1000 ±100 mA.

QFN-Packaged bq24270/271 Evaluation Modules

SLUU924 – April 2012

Submit Documentation Feedback