Texas Instruments LM3671 Evaluation Board LM3671LC-1.8EV/NOPB LM3671LC-1.8EV/NOPB Datenbogen
Produktcode
LM3671LC-1.8EV/NOPB
1
3
4
6
En
Pgnd
Vin
2
5
Sw
Sgnd
Fb
TOP VIEW
SNVS294Q – NOVEMBER 2004 – REVISED NOVEMBER 2013
Figure 5. 6-Pin USON Package
See Package Number NKH0006B (2 mm x 2 mm x 0.6 mm)
PIN DESCRIPTIONS (SOT-23)
Pin #
Name
Description
1
V
IN
Power supply input. Connect to the input filter capacitor (
).
2
GND
Ground pin.
3
EN
Enable pin. The device is in shutdown mode when voltage to this pin is <0.4V and enabled
when >1.0V. Do not leave this pin floating.
when >1.0V. Do not leave this pin floating.
4
FB
Feedback analog input. Connect directly to the output filter capacitor for fixed voltage
versions. For adjustable version external resistor dividers are required (
versions. For adjustable version external resistor dividers are required (
). The
internal resistor dividers are disabled for the adjustable version.
5
SW
Switching node connection to the internal PFET switch and NFET synchronous rectifier.
PIN DESCRIPTIONS (5-Bump DSBGA)
Pin #
Name
Description
A1
V
IN
Power supply input. Connect to the input filter capacitor (
).
A3
GND
Ground pin.
C1
EN
Enable pin. The device is in shutdown mode when voltage to this pin is <0.4V and enabled
when >1.0V. Do not leave this pin floating.
when >1.0V. Do not leave this pin floating.
C3
FB
Feedback analog input. Connect directly to the output filter capacitor for fixed voltage
versions. For adjustable version external resistor dividers are required (
versions. For adjustable version external resistor dividers are required (
). The
internal resistor dividers are disabled for the adjustable version.
B2
SW
Switching node connection to the internal PFET switch and NFET synchronous rectifier.
PIN DESCRIPTIONS (6-Pin USON)
Pin #
Name
Description
1
EN
Enable pin. The device is in shutdown mode when voltage to this pin is <0.4V and enabled
when >1.0V. Do not leave this pin floating.
when >1.0V. Do not leave this pin floating.
2
Pgnd
Ground pin.
3
V
IN
Power supply input. Connect to the input filter capacitor (
).
4
SW
Switching node connection to the internal PFET switch and NFET synchronous rectifier.
5
Sgnd
Singnal ground (feedback ground).
6
FB
Feedback analog input. Connect directly to the output filter capacitor for fixed voltage
versions. For adjustable version external resistor dividers are required (
versions. For adjustable version external resistor dividers are required (
). The
internal resistor dividers are disabled for the adjustable version.
These devices have limited built-in ESD protection. The leads should be shorted together or the device placed in conductive foam
during storage or handling to prevent electrostatic damage to the MOS gates.
during storage or handling to prevent electrostatic damage to the MOS gates.
Copyright © 2004–2013, Texas Instruments Incorporated
3
Product Folder Links: