Texas Instruments TPS2359 Dual-Slot ATCA AdvancdMC Controller with I2C Evaluation Module TPS2359EVM TPS2359EVM Datenbogen
Produktcode
TPS2359EVM
5
Test Set-Up
5.1
Equipment Requirements
www.ti.com
Test Set-Up
The following test and interface equipment (not supplied) is required to verify EVM module operation, and
begin using the EVM.
begin using the EVM.
•
Power supply, 3.3 VDC, 500 mA minimum
•
Power supply, 15 VDC, 10 A minimum
•
Digital multimeters
•
Oscilloscope, 4 channel, with current probe
•
Personal computer, running Windows OS (95/98/2000/NT/XP), with USB port
Connect the TPS2359EVM and test equipment as shown in
for functional check-out of the board
and a good starting point for user evaluation of device operation. Screen print labeling on the board
employs a naming convention in keeping with the nomenclature of the target ATCA™ and MicroTCA™
applications. Input 3.3-V supplies are connected to the 3V3INx jacks, and 12-V supplies are connected to
the 12VINx jacks. A cross-reference of power rail labeling to standards naming is shown in
employs a naming convention in keeping with the nomenclature of the target ATCA™ and MicroTCA™
applications. Input 3.3-V supplies are connected to the 3V3INx jacks, and 12-V supplies are connected to
the 12VINx jacks. A cross-reference of power rail labeling to standards naming is shown in
Table 4. TPS2359EVM Output Net and Jack Naming
REF DES
CONNECTOR
LABEL DESCRIPTION
J8
SLOT A MP
AdvancedMC™ Slot A Management Power
J7
SLOT A PWR
AdvancedMC™ Slot A Payload Power
J9
GND
Common load return node for Slot A
J11
SLOT B MP
AdvancedMC™ Slot B Management Power
J10
SLOT B PWR
AdvancedMC™ Slot B Payload Power
J12
GND
Common load return node for Slot B
SLUU318 – August 2008
7
TPS2359 Dual-Slot ATCA™ AdvancedMC™ Controller with I
2
C Evaluation Module