Texas Instruments TLV320DAC3203 Evaluation Module TLV320DAC3203EVM-K TLV320DAC3203EVM-K Datenbogen
Produktcode
TLV320DAC3203EVM-K
DAC3203 Control Software
4.2
Status Flags Panel
The TLV320DAC3203 status flags are monitored in the Status Flags panel (
), located below the
Panel Selection Tree . Pressing the POLL button continuously reads all the registers relevant to each
flag and updates those flags accordingly. The rate at which the registers are read is modified by changing
the value in the Polling Interval numeric control. Note that a smaller interval reduces responsiveness of
other controls, especially volume sliders, due to bandwidth limitations. By default, the polling interval is
200 ms with a minimum setting 20 ms.
flag and updates those flags accordingly. The rate at which the registers are read is modified by changing
the value in the Polling Interval numeric control. Note that a smaller interval reduces responsiveness of
other controls, especially volume sliders, due to bandwidth limitations. By default, the polling interval is
200 ms with a minimum setting 20 ms.
The Sticky Flags tab contains indicators whose corresponding register contents clear every time a read is
performed to that register. Read all the sticky flags by clicking the Read Sticky Flags button.
performed to that register. Read all the sticky flags by clicking the Read Sticky Flags button.
Figure 7. Status Flags Panel
13
SLAU441 – April 2012
TLV320DAC3203EVM-K
Copyright © 2012, Texas Instruments Incorporated