Texas Instruments VCA5807 Evaluation Module VCA5807EVM VCA5807EVM Datenbogen
Produktcode
VCA5807EVM
Hardware
4.2
Board Configuration
Power up the VCA5807EVM by applying +5 V and –5 V to the P1 connector. After power up is complete,
three green LEDs and three red LEDs (
three green LEDs and three red LEDs (
LED 41, LED42, and LED 43
) are turned. Locations of LEDs are
shown in
.
Figure 8. PCB Layout With Jumper Positions
12
VCA5807 Development Guide
SLOU352 – November 2012
Copyright © 2012, Texas Instruments Incorporated