Texas Instruments AFE5807 Evaluation Module AFE5807EVM AFE5807EVM Datenbogen
Produktcode
AFE5807EVM
TEST AFE5807
•
Press the Capture button on the TSW1250 GUI. This displays a ramping waveform on the TSW1250
GUI display area as shown in the following illustration.
GUI display area as shown in the following illustration.
•
Repeat for Channel 2 and Channel 8.
•
If each channel has the output as shown in the following illustration, proceed with the next
step; otherwise, contact the TI FAE to troubleshoot the problem.
step; otherwise, contact the TI FAE to troubleshoot the problem.
•
On the AFE5807 GUI, change Test Pattern from Ramp to None for the next step.
10
AFE5807EVM (Rev E) Evaluation Module
SLOU329A
–
November 2011
–
Revised December 2011
Copyright
©
2011, Texas Instruments Incorporated