Microchip Technology AC244002 Datenbogen
All-in-One In-Circuit Emulator/Programmer Solution
for Microchip Flash Products
for Microchip Flash Products
MPLAB REAL ICE In-Circuit Emulator System is Microchip’s next
generation high-speed emulator for Microchip Flash Digital
Signal Controller (DSC) and microcontroller (MCU) devices. It
debugs and programs PIC® Flash microcontrollers and dsPIC®
DSCs with the powerful, yet easy-to-use graphical user interface
of MPLAB Integrated Development Environment (IDE).
generation high-speed emulator for Microchip Flash Digital
Signal Controller (DSC) and microcontroller (MCU) devices. It
debugs and programs PIC® Flash microcontrollers and dsPIC®
DSCs with the powerful, yet easy-to-use graphical user interface
of MPLAB Integrated Development Environment (IDE).
The MPLAB REAL ICE In-Circuit Emulator probe is connected
to the design engineer’s PC using a high-speed USB 2.0
interface and is connected to the target with either a connector
compatible with the MPLAB ICD 2 system (RJ-11) or with the
new high-speed, noise tolerant, Low-Voltage Differential Signal
(LVDS) interconnection (CAT5).
to the design engineer’s PC using a high-speed USB 2.0
interface and is connected to the target with either a connector
compatible with the MPLAB ICD 2 system (RJ-11) or with the
new high-speed, noise tolerant, Low-Voltage Differential Signal
(LVDS) interconnection (CAT5).
The MPLAB REAL ICE In-Circuit Emulator System offers the
following advantages:
following advantages:
•
Full-Speed Real-time Emulation
MPLAB REAL ICE In-Circuit Emulator is designed to support
high-speed processors running at maximum speeds,
allowing embedded engineers to debug applications on their
own hardware in real time.
high-speed processors running at maximum speeds,
allowing embedded engineers to debug applications on their
own hardware in real time.
•
Ruggedized Probe Interface
Protection circuitries are added to the probe drivers to guard
the probe kit from power surges from the target.
the probe kit from power surges from the target.
•
Legacy and High-speed Connectivity
MPLAB REAL ICE In-Circuit Emulator comes standard
with a MPLAB ICD 2 type connector (RJ-11). An optional
Performance Pak offers high-speed, noise-tolerant,
LVDS, extended length CAT5 standard (up to 3 meters)
connectivity.
with a MPLAB ICD 2 type connector (RJ-11). An optional
Performance Pak offers high-speed, noise-tolerant,
LVDS, extended length CAT5 standard (up to 3 meters)
connectivity.
•
Logic Probe For External Triggers
A logic probe is included and can be connected to the 14-pin
header on the unit. It supports 8 user-selectable input/
outputs that automatically adjust to the targeting voltage
level. The outputs can also trigger an external logic analyzer
or oscilloscope.
header on the unit. It supports 8 user-selectable input/
outputs that automatically adjust to the targeting voltage
level. The outputs can also trigger an external logic analyzer
or oscilloscope.
•
Trace Execution and Analysis
Through its high-speed communication bus, connection
schemes and trace-aware compilers, MPLAB REAL ICE
In-Circuit Emulator offers multiple ways to trace execution
and log information about running applications: real-time
watch, data capture, streaming parallel trace using device
I/O port or streaming serial trace using SPI/UART.
schemes and trace-aware compilers, MPLAB REAL ICE
In-Circuit Emulator offers multiple ways to trace execution
and log information about running applications: real-time
watch, data capture, streaming parallel trace using device
I/O port or streaming serial trace using SPI/UART.
•
Portable, USB-powered and RoHS-Compliant
Housed in a small (4.7
″ w x 3.4″ d x 0.84″ h) and attractive
enclosure, the MPLAB REAL ICE In-Circuit Emulator is
powered by the USB port, so an external power adapter is
not required. MPLAB REAL ICE In-Circuit Emulator is CE and
RoHS-compliant.
powered by the USB port, so an external power adapter is
not required. MPLAB REAL ICE In-Circuit Emulator is CE and
RoHS-compliant.
M i c r o c h i p T e c h n o l o g y I n c o r p o r a t e d
MPLAB® REAL ICE™ In-Circuit Emulator
•
Ease of Maintenance and Feature Upgrade
Adding new device support and advanced features to
MPLAB REAL ICE In-Circuit Emulator is just as simple as
installing later versions of the MPLAB IDE, downloadable
free from the Microchip web site http://www.microchip.
com/mplab. MPLAB REAL ICE In-Circuit Emulator is fi eld
upgradeable through a fi rmware download from MPLAB
IDE.
MPLAB REAL ICE In-Circuit Emulator is just as simple as
installing later versions of the MPLAB IDE, downloadable
free from the Microchip web site http://www.microchip.
com/mplab. MPLAB REAL ICE In-Circuit Emulator is fi eld
upgradeable through a fi rmware download from MPLAB
IDE.
•
Low Cost
At less than $500, the MPLAB REAL ICE In-Circuit
Emulator breaks the price barrier for a complete and
advanced in-circuit emulator, offering new ways to
interact with and debug applications at a fraction of the
cost of traditional emulator systems.
Emulator breaks the price barrier for a complete and
advanced in-circuit emulator, offering new ways to
interact with and debug applications at a fraction of the
cost of traditional emulator systems.
Features
•
Real-time
execution
•
Fast
programming
•
USB 2.0 high-speed interface to PC (480 Mb/s)
•
MPLAB IDE integration (included free)
•
Overvoltage/short-circuit monitor protection
•
Low voltage: to 2.0 volts (2.0 to 6.0 range)
•
Read/Write program and data memory of microcontroller
•
Erase of program memory space with verifi cation
•
Stopwatch
•
Hardware and software breakpoints*
•
Real-time
watch
•
Capture trace to log instruction execution and variable
contents (~10 KB/s at 4 MHz 16-bit core)
•
Port trace for high-speed upload of trace data
•
High-speed option allows full-speed emulation, high-speed
trace upload and long (validated to 3 meters) cables
•
Processor Paks* provide debug interface with no
reserved
pins
NEW
*Future feature.