Microchip Technology MCP3421EV Benutzerhandbuch
Quick Start Instructions
© 2009 Microchip Technology Inc.
DS51793A-page 9
1.3.1
PICkit Serial Analyzer PC Software Set-Up for the MCP3421
SOT23-6 Evaluation Board
SOT23-6 Evaluation Board
The following steps describe how to set up and use the PICkit Serial Analyzer PC
Graphic User Interface (GUI) to write the configuration bits of the MCP3421 on the
Evaluation Board and read the ADC conversion results.
Graphic User Interface (GUI) to write the configuration bits of the MCP3421 on the
Evaluation Board and read the ADC conversion results.
1.
Install the PICkit Serial Analyzer software onto your personal computer (PC).
2.
Connect the USB cable between the PICkit Serial Analyzer and your PC.
3.
Run the PICkit Serial PC Software. The following graphic user interface (GUI) will
appear. Click the Next button and follow the instructions.
appear. Click the Next button and follow the instructions.
FIGURE 1-3:
PICkit Serial Analyzer Configuration Wizard Welcome Window.
4.
Select the I
2
C Master option as communication mode, and click the Next button.
FIGURE 1-4:
Step 1 - Communication Mode Selection.