Insys GSM EASY 4.1 11-02-01-03-01.027 Benutzerhandbuch
Produktcode
11-02-01-03-01.027
INSYS GSM 4.2 easy
Configuration with the Software HSComm easy
January 07
27
5
Configuration with the Software HSComm easy
5.1
General
The software HSComm easy is used to configure the INSYS GSM 4.2 easy in
Windows, without the need for explicit knowledge of the AT commands and their
parameters. The settings are only sent to or read from the INSYS GSM 4.2 easy
after the according instruction (buttons Send settings or Read settings).
The configuration software HSComm is available on the Internet for free
download: http://www.insys-tec.de/
The software can also be found on the supplied CD-ROM.
Windows, without the need for explicit knowledge of the AT commands and their
parameters. The settings are only sent to or read from the INSYS GSM 4.2 easy
after the according instruction (buttons Send settings or Read settings).
The configuration software HSComm is available on the Internet for free
download: http://www.insys-tec.de/
The software can also be found on the supplied CD-ROM.
5.2
Help
The context sensitive help is available any time via the key F1 or the menu Help.
Help also contains the complete command reference for the extended INSYS AT
commands.
Help also contains the complete command reference for the extended INSYS AT
commands.
5.3
Menus
5.3.1 File
The current settings, as displayed in the HSComm user interface, can be saved as a
file and read out again.
file and read out again.
5.3.2 Interface
Setting of the serial interface which is
used at the configuration PC. The baud
rate and the format (data bits, stop bit,
and parity) must match the settings of the
serial interface at the INSYS GSM 4.2 easy.
rate and the format (data bits, stop bit,
and parity) must match the settings of the
serial interface at the INSYS GSM 4.2 easy.