Insys GSM EASY 4.1 11-02-01-03-01.027 Benutzerhandbuch
Produktcode
11-02-01-03-01.027
INSYS GSM 4.2 easy
Remote Configuration with EASY-SOFT and INSYS Connect
January 07
39
Please note:
To perform the remote configuration, the waiting period in EASY-SOFT must be
adjusted. Otherwise, EASY-SOFT doesn’t wait long enough for the response of the
addressed easy device. This device is not located at the local serial port, but the
communication takes place via the GSM network. The response times are delayed
due to the transmission link.
Depending on the quality of the connection, the waiting period for the
communication set up must be increased more or less.
The according waiting period of
EASY-SOFT must be set at
“Communication“ -> “Interface“
-> “Timeout“ -> “Device“
For the easy 500 and 700 devices,
the "Timeout for Communication”
must be increased to at least
1000 ms.
To perform the remote configuration, the waiting period in EASY-SOFT must be
adjusted. Otherwise, EASY-SOFT doesn’t wait long enough for the response of the
addressed easy device. This device is not located at the local serial port, but the
communication takes place via the GSM network. The response times are delayed
due to the transmission link.
Depending on the quality of the connection, the waiting period for the
communication set up must be increased more or less.
The according waiting period of
EASY-SOFT must be set at
“Communication“ -> “Interface“
-> “Timeout“ -> “Device“
For the easy 500 and 700 devices,
the "Timeout for Communication”
must be increased to at least
1000 ms.
For the easy 800 and MFD devices,
the "Timeout for Communication”
must be increased to at least
1000 ms.
After the settings were changed, the configuration program EASY-SOFT must
definitely be closed and restarted. Otherwise, the settings may not be accepted
and the communication may fail.
definitely be closed and restarted. Otherwise, the settings may not be accepted
and the communication may fail.