Gw Instek PCS-1000 Digital-Multimeter, DMM, PCS-1000 Datenbogen
Produktcode
PCS-1000
COMMUNICATION INTERFACE
65
CONFigure:VOLTage:AC
Set
Description
This command will set the voltage mode to AC
and set the ACV range. If the range is not specified
then it will not be changed.
and set the ACV range. If the range is not specified
then it will not be changed.
Syntax
CONFigure:VOLTage:AC [<Range> | AUTO]
Parameter
<Range>
Voltage range <NRf>: 0.0000001~630
The unit will automatically be set to the
closest range.
The unit will automatically be set to the
closest range.
AUTO
Autoset
Example
CONF:VOLT:AC 20
Sets the voltage mode to AC and the ACV range to
20V.
Sets the voltage mode to AC and the ACV range to
20V.
Example
CONF:VOLT:AC
Sets the voltage mode to AC. The range stays the
same.
Sets the voltage mode to AC. The range stays the
same.
CONFigure:AVERage:MODE
Set
Query
Description
This command will set or query the average mode.
Syntax
Query Syntax
Query Syntax
CONFigure:AVERage:MODE {0|1,TOTAL|SHIFT}
CONFigure:AVERage:MODE?
CONFigure:AVERage:MODE?
Parameter
0, TOTAL
Total mode
1, SHIFT
Shift mode
Return Parameter Total
Total mode
Shift
Shift mode
Example
CONF:AVER:MODE 0
Sets the average mode to Total mode.
Sets the average mode to Total mode.