Gw Instek LCR-819 Digital-Multimeter, DMM, LCR-819 Datenbogen

 

 

To ensure fire protection, replace the fuse only 
with the specified type and rating. 

 

Disconnect the power cord before fuse 
replacement. 

 

Make sure the cause of fuse blowout is fixed 
before fuse replacement. 

Cleaning LCR-800 

 

Disconnect the power cord before cleaning. 

 

Use a soft cloth dampened in a solution of mild 
detergent and water. Do not spray any liquid. 

 

Do not use chemical or cleaner containing harsh 
material such as benzene, toluene, xylene, and 
acetone. 

Operation 
Environment 

 

Location: Indoor, no direct sunlight, dust free, 
almost non-conductive pollution (Note below) 

 

Relative Humidity: < 85% 

 

Altitude: < 2000m 

 

Temperature: 10°C to 50°C 

 

(Pollution Degree) EN 61010-1:2001 specifies the pollution degrees 
and their requirements as follows. LCR-800 falls under degree 2. 

Pollution refers to “addition of foreign matter, solid, liquid, or 
gaseous (ionized gases), that may produce a reduction of dielectric 
strength or surface resistivity”. 

  Pollution degree 1: No pollution or only dry, non-conductive 

pollution occurs. The pollution has no influence. 

  Pollution degree 2: Normally only non-conductive pollution 

occurs. Occasionally, however, a temporary conductivity caused 
by condensation must be expected. 

  Pollution degree 3: Conductive pollution occurs, or dry, non-

conductive pollution occurs which becomes conductive due to 
condensation which is expected. In such conditions, equipment 
is normally protected against exposure to direct sunlight, 
precipitation, and full wind pressure, but neither temperature 
nor humidity is controlled. 

Storage 
environment 

 

Location: Indoor 

 

Relative Humidity: < 85%  

 

Temperature: −20°C to 60°C 

Disposal 

 

Do not dispose this instrument as unsorted 
municipal waste. Please use a separate collection 
facility or contact the supplier from which this 
instrument was purchased. Please make sure 
discarded electrical waste is properly recycled to 
reduce environmental impact.