Tektronix DMM4020 Digital-Multimeter, DMM, VFD-Multiple segment, 20000 counts CAT II 600 V DMM4020-A1 Datenbogen
Produktcode
DMM4020-A1
Operating the Meter Using the Computer Interface
Computer Interface Command Set
4
4-25
Miscellaneous Commands and Queries
Table 4-15 describes miscellaneous commands and queries.
Table 4-15. Miscellaneous Commands and Queries
Command Description
^C (CONTRL C)
Causes =><CR><LF> to be output.
FORMAT <format>
Set output <format> to 1 or 2.
Format 1 outputs measurement values without measurement units (VDC,
ADC, OHMS, etc.).
ADC, OHMS, etc.).
Format 2 allows measurement units to be output with measurement units.
(See Table 4-16.) Format 2 primarily is used with RS-232 print-only mode.
(See Table 4-16.) Format 2 primarily is used with RS-232 print-only mode.
FORMAT?
Returns the format in use (1 or 2).
PRINT <rate>
Sets print rate for print mode. See Table 4-2.
SERIAL? Returns
Meter’s serial number.
Table 4-16. Measurement Units Output with Format 2
Measurement Function
Units Output
Volts dc
VDC
Volts ac
VAC
Amps dc
ADC
Amps ac
AAC
Resistance OHMS
Frequency HZ
DIODE VDC
Continuity Test
OHMS