Freescale Semiconductor Demonstration Board for Freescale MC9S12XHY256 Microcontroller DEMO9S12XHY256 DEMO9S12XHY256 Benutzerhandbuch
Produktcode
DEMO9S12XHY256
S12XE Clocks and Reset Generator (S12XECRGV2)
MC9S12XHY-Family Reference Manual, Rev. 1.04
Freescale Semiconductor
289
S12XECRG performs a quality check on the incoming clock signal. As soon as clock quality check
indicates a valid Oscillator Clock signal the reset sequence starts using the Oscillator clock. If after 50
check windows the clock quality check indicated a non-valid Oscillator Clock the reset sequence starts
using Self-Clock Mode.
indicates a valid Oscillator Clock signal the reset sequence starts using the Oscillator clock. If after 50
check windows the clock quality check indicated a non-valid Oscillator Clock the reset sequence starts
using Self-Clock Mode.
and
show the power-up sequence for cases when the RESET pin is tied to V
DD
and when the RESET pin is held low.
Figure 7-22. RESET Pin Tied to V
DD
(by a Pull-up Resistor)
Figure 7-23. RESET Pin Held Low Externally
7.6
Interrupts
The interrupts/reset vectors requested by the S12XECRG are listed in
. Refer to MCU
specification for related vector addresses and priorities.
Table 7-18. S12XECRG Interrupt Vectors
Interrupt Source
CCR
Mask
Local Enable
Real time interrupt
I bit
CRGINT (RTIE)
LOCK interrupt
I bit
CRGINT (LOCKIE)
SCM interrupt
I bit
CRGINT (SCMIE)
RESET
Internal POR
128 SYSCLK
64 SYSCLK
Internal RESET
Clock Quality Check
(no Self-Clock Mode)
(no Self-Clock Mode)
) (
) (
) (
Clock Quality Check
RESET
Internal POR
Internal RESET
128 SYSCLK
64 SYSCLK
(no Self Clock Mode)
) (
) (
) (